Manifold Flexible Heater Replacement Guide

Important!

-The power supply must be disconnected.

-The heater, nozzle and melt must be cooled down before dismantling.

-Warning: risk of burns!

1. The centre of the flexible heater groove is marked on the hot runner manifold

Manifold Flexible Heater Replacement Guide (2)

2. Remove the defective heater from the groove with a suitable tool

Manifold Flexible Heater Replacement Guide (1)

3. Insert the new flexible heater starting from the center (align centre of flexible heater with the centre of the heater groove in the manifold). Following the groove course, bend the flexible heater piece by piece by hand and hammer it in with a plastic hammer

Manifold Flexible Heater Replacement Guide (3)
Manifold Flexible Heater Replacement Guide (4)

Important!

-Avoid repeated bending of the flexible heater.

-Do not bend the heater end sections beyond the marks.

-Heating elements must not come into contact with flammable materials during operation.

-Following the protective measures for electrical divices/systems during operation.

Manifold Flexible Heater Replacement Guide from Meusburger

“Do you have a problem with hot runner controlling?”

Send us your question, we will offer up some advice.